The Best Wash and Cure Station for the Anycubic Photon Mono
Researched by Johnny Alto · Published July 20, 2026
Short answer: The best wash and cure station for the Anycubic Photon mono are the Anycubic Wash and Cure 3.0. The natural match for a Photon Mono. The main things to weigh are fits your printer, washes and cures, even uv cure, and do not over-cure.
Top pickAnycubic Wash and Cure 3.0View offer →
Anycubic Wash and Cure 3.0
The natural match for a Photon Mono. It is sized to fit the Mono plate and models, it both washes (a magnetic stirrer swirls the print in alcohol) and cures (a rotating UV turntable) in the same unit, and it is one of the most common stations in the resin community. Owners like that it takes the mess and guesswork out of post-processing.
View on Amazon Editorial illustration.Resin prints come off the plate sticky and only reach full strength after a wash in alcohol and a UV cure. Doing both by hand is messy and uneven. A wash and cure station automates it in one unit. Photon Mono owners look for a station whose basket fits the Mono build plate and that both washes and cures.
How do the best options for wash and cure station for the Anycubic Photon mono compare?
| Pick | Product | Why it makes the list |
|---|---|---|
| Top pick | Anycubic Wash and Cure 3.0 | The natural match for a Photon Mono. |
| Larger | Elegoo Mercury Plus V2.0 Wash and Cure | A separate wash-and-cure set with a bigger capacity for larger prints. More bench space, but handy if you print big or in volume. |
What should you look for in wash and cure station for the Anycubic Photon mono?
A few things separate a good wash and cure station for the Anycubic Photon mono from a frustrating one: fits your printer, washes and cures, even uv cure, and do not over-cure. Weigh these before you buy.
- Fits your printer: the basket should clear the Mono plate and prints.
- Washes and cures: one unit that does both saves money and mess.
- Even UV cure: a rotating turntable cures all sides evenly.
- Do not over-cure: too long makes resin brittle, so follow cure times.
What are the best alternatives?
Elegoo Mercury Plus V2.0 Wash and Cure
A separate wash-and-cure set with a bigger capacity for larger prints. More bench space, but handy if you print big or in volume.
Bottom line: the Anycubic Wash and Cure 3.0 is the natural fit for a Photon Mono; the Elegoo Mercury Plus is the bigger-capacity alternative.
Frequently asked questions
What are the best wash and cure station for the Anycubic Photon mono?
Anycubic Wash and Cure 3.0. The natural match for a Photon Mono.
What should you look for in wash and cure station for the Anycubic Photon mono?
Focus on fits your printer, washes and cures, even uv cure, and do not over-cure.
What is a good alternative to the Anycubic Wash and Cure 3.0?
The Elegoo Mercury Plus V2.0 Wash and Cure. A separate wash-and-cure set with a bigger capacity for larger prints. More bench space, but handy if you print big or in volume.
Related buying guides
- UV Resin for Jewelry Making
- Pressure Pot for Resin Dice Casting
- Textured PEI Plate for a Bambu Lab X1C (PETG)
- Nitrile Gloves for Resin 3D Printing
- Heat Gun for Epoxy Resin
This is a research-based buying guide, not a personal hands-on review. Product details, prices, and availability can change; confirm the current listing on Amazon. As an Amazon Associate I earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
← More Guides: S–Z · All guides · How we research · About · Affiliate Disclosure · Privacy Policy · Contact