Anycubic Wash & Cure 3 vs 3 Plus
Researched by Johnny Alto · last updated July 27, 2026
Short answer: For most buyers, the Anycubic Wash & Cure 3 Plus is the better pick over the Anycubic Wash & Cure 3 (standard). If you print large models or batch-cure on a big-bed printer, the 3 Plus is the one to get, and its bigger chamber also future-proofs you as printers get larger.
Anycubic Wash & Cure 3 Plus
If you print large models or batch-cure on a big-bed printer, the 3 Plus is the one to get, and its bigger chamber also future-proofs you as printers get larger. It has a much larger wash bucket and a curing zone about 42 percent bigger than the standard 3, with lens-array LEDs for more even curing, all doing the wash and rotating cure in one machine. It is the safer buy if you are unsure your prints will fit the smaller unit.
Check price on Amazon Live price on Amazon. Representative image.These are the same all-in-one wash-and-cure station in two sizes, so the choice is simply about matching the chamber to your prints. The 3 Plus roughly doubles the wash and cure capacity of the standard 3. Here is how to size it.
Anycubic Wash & Cure 3 Plus vs Anycubic Wash & Cure 3 (standard): what is the difference?
| Pick | Product | Why it makes the list |
|---|---|---|
| Top pick | Anycubic Wash & Cure 3 Plus | If you print large models or batch-cure on a big-bed printer, the 3 Plus is the one to get, and its bigger chamber also future-proofs you as printers get larger. |
| For small printers | Anycubic Wash & Cure 3 (standard) | The standard 3 is cheaper and right-sized if your prints fit a roughly 160 by 180 mm curing zone (Mars 4, Mono 4 class). Watch the naming: the older 'Wash and Cure 3.0' is a different, earlier machine, so confirm you are getting the current standard 3 before buying to save over the Plus. |
Which one should you buy?
The two are close, so the choice comes down to a few things: match your prints, capacity, same workflow, and naming trap. Here is how they split.
- Match your prints: the standard 3 suits small/mid printers; the Plus fits large-format models.
- Capacity: the Plus roughly doubles the wash volume and adds about 42 percent more cure room.
- Same workflow: both wash and rotate-cure in one machine on a timer.
- Naming trap: the old 'Wash and Cure 3.0' is not the current 'Wash & Cure 3', so check before buying.
Head-to-head specs
| Spec | Wash & Cure 3 Plus (pick) | Wash & Cure 3 (standard) |
|---|---|---|
| Serves printers up to | ~10.6 in | ~7.3 in |
| Wash volume | 12 L bucket | 4 L bucket |
| Max cure model | Ø220 x 260 mm | Ø160 x 180 mm |
| Curing | Lens-array LEDs | Gooseneck spot |
| Approx price | ~$150 | ~$100 |
When to pick the Anycubic Wash & Cure 3 (standard) instead
Anycubic Wash & Cure 3 (standard)
The standard 3 is cheaper and right-sized if your prints fit a roughly 160 by 180 mm curing zone (Mars 4, Mono 4 class). Watch the naming: the older 'Wash and Cure 3.0' is a different, earlier machine, so confirm you are getting the current standard 3 before buying to save over the Plus.
Bottom line: the Anycubic Wash & Cure 3 Plus is the safe pick for large prints and future-proofing, while the standard 3 saves money if your prints fit its smaller chamber.
Frequently asked questions
Is the Anycubic Wash & Cure 3 Plus better than the Anycubic Wash & Cure 3 (standard)?
For most buyers, yes. If you print large models or batch-cure on a big-bed printer, the 3 Plus is the one to get, and its bigger chamber also future-proofs you as printers get larger.
What is the main difference between the Anycubic Wash & Cure 3 Plus and the Anycubic Wash & Cure 3 (standard)?
The standard 3 is cheaper and right-sized if your prints fit a roughly 160 by 180 mm curing zone (Mars 4, Mono 4 class).
Which wash and cure station is better value, the Anycubic Wash & Cure 3 Plus or the Anycubic Wash & Cure 3 (standard)?
It depends on your budget and needs. The Anycubic Wash & Cure 3 Plus is the all-round pick; the Anycubic Wash & Cure 3 (standard) wins in the cases below.
Related buying guides
- UV Resin for Jewelry Making
- Pressure Pot for Resin Dice Casting
- Wash and Cure Station for the Anycubic Photon Mono
- Textured PEI Plate for a Bambu Lab X1C (PETG)
- Nitrile Gloves for Resin 3D Printing
This is a research-based buying guide, not a personal hands-on review; recommendations reflect community consensus and verified buyer reviews. Prices and availability are subject to change, so always confirm on Amazon. As an Amazon Associate I earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
← All guides · How we research · About · Affiliate Disclosure · Privacy Policy · Contact