The Best CA Glue for 3D Printing
Researched by Johnny Alto · last updated July 27, 2026
Short answer: The best CA glue for 3D printing is the Starbond EM-150 Medium CA Glue. The CA the 3D printing crowd reaches for most. The main things to weigh are right viscosity, anti-clog tips, low fogging, and useful size.
Starbond EM-150 Medium CA Glue
The CA the 3D printing crowd reaches for most. The Starbond EM-150 is a medium viscosity around 150 cps, the sweet spot for gluing multi-part prints with a touch of gap-fill, and the 2 ounce Pro Kit includes an anti-clog cap plus microtips so the bottle does not seize between uses. It sets in seconds, bonds PLA, PETG, and resin well, and the generous size lasts through many projects. For all-round print assembly it is the reliable, best-value pick.
Check price on Amazon Live price on Amazon. Representative image.CA glue (cyanoacrylate, or super glue) is how you join multi-part prints, fill small seams, and even rigidize a print, but viscosity matters: medium bonds parts with a little gap-fill, thin wicks into tight seams, and gel stays put on vertical joints. For 3D prints you also want low fogging on clear or resin parts. Look for the right viscosity, a decent bottle size with anti-clog tips, and low frosting.
How do the best options for CA glue for 3D printing compare?
| Pick | Product | Why it makes the list |
|---|---|---|
| Top pick | Starbond EM-150 Medium CA Glue | The CA the 3D printing crowd reaches for most. |
| Odorless / no-fog | Bob Smith Super-Gold+ (Odorless) | A medium odorless CA that does not frost, so it will not fog clear or resin prints or sting your eyes in a small room. Slightly smaller bottle, but the non-fogging, low-odor formula is worth it for visible or transparent parts. |
| No-run gel | Gorilla Super Glue Gel | A thick gel that stays where you put it, ideal for vertical seams and overhead joints where thin CA would run. Cheapest and available everywhere; grab it for quick fixes and awkward-angle bonds. |
What should you look for in CA glue for 3D printing?
A few things separate a good CA glue for 3D printing from a frustrating one: right viscosity, anti-clog tips, low fogging, and useful size. Weigh these before you buy.
- Right viscosity: medium for assembly, thin to wick seams, gel for vertical joints.
- Anti-clog tips: a cap and microtips so the bottle lasts.
- Low fogging: a non-frosting formula for clear or resin prints.
- Useful size: enough glue that it does not run dry mid-project.
How the picks compare on specs
| Spec | Starbond EM-150 (pick) | Bob Smith Super-Gold+ | Gorilla Super Glue Gel |
|---|---|---|---|
| Viscosity | Medium (~150 cps) | Medium (odorless) | Thick gel |
| Size | 2 oz | 1 oz | 20 g |
| Set time | ~10-25 sec | ~5-15 sec | ~10-45 sec |
| Fogging | Low | None (no-frost) | Low |
| Approx price | ~$16 | ~$12 | ~$6 |
What are the best alternatives?
Bob Smith Super-Gold+ (Odorless)
A medium odorless CA that does not frost, so it will not fog clear or resin prints or sting your eyes in a small room. Slightly smaller bottle, but the non-fogging, low-odor formula is worth it for visible or transparent parts.
Check price on AmazonGorilla Super Glue Gel
A thick gel that stays where you put it, ideal for vertical seams and overhead joints where thin CA would run. Cheapest and available everywhere; grab it for quick fixes and awkward-angle bonds.
Check price on AmazonBottom line: the Starbond EM-150 medium is the all-round assembly pick; the Bob Smith odorless avoids fogging clear parts and the Gorilla gel handles vertical seams.
Frequently asked questions
What is the best CA glue for 3D printing?
Starbond EM-150 Medium CA Glue. The CA the 3D printing crowd reaches for most.
What should you look for in CA glue for 3D printing?
Focus on right viscosity, anti-clog tips, low fogging, and useful size.
What is a good alternative to the Starbond EM-150 Medium CA Glue?
The Bob Smith Super-Gold+ (Odorless). A medium odorless CA that does not frost, so it will not fog clear or resin prints or sting your eyes in a small room. Slightly smaller bottle, but the non-fogging, low-odor formula is worth it for visible or transparent parts.
Related buying guides
- UV Resin for Jewelry Making
- Pressure Pot for Resin Dice Casting
- Wash and Cure Station for the Anycubic Photon Mono
- Textured PEI Plate for a Bambu Lab X1C (PETG)
- Nitrile Gloves for Resin 3D Printing
This is a research-based buying guide, not a personal hands-on review; recommendations reflect community consensus and verified buyer reviews. Prices and availability are subject to change, so always confirm on Amazon. As an Amazon Associate I earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
← All guides · How we research · About · Affiliate Disclosure · Privacy Policy · Contact