Milescraft 1406 FeatherBoard
This is the default recommendation because it ships with both 5/8 inch and 3/4 inch miter bars, so it locks securely into.
View on Amazon →The Best Featherboard for a Table Saw
Researched by Johnny Alto · Updated October 12, 2026
Research pick: Based on product documentation and owner discussions. How we research →
Short answer: Our top pick is the Milescraft 1406 FeatherBoard. This is the default recommendation because it ships with both 5/8 inch and 3/4 inch miter bars, so it locks securely into the standard miter slots.
Top pickMilescraft 1406 FeatherBoardView offer →
Top pick
Milescraft 1406 FeatherBoard
This is the default recommendation because it ships with both 5/8 inch and 3/4 inch miter bars, so it locks securely into the standard miter slots on the large majority of table saws and.
Mount typeFitSafety
View on Amazon
Product image.
A featherboard presses stock firmly against the fence so the workpiece cannot drift or kick back toward you, which is the whole safety point, so fit is everything. Slot-mounted boards need to match your saw's miter slot, either 5/8 or 3/4 inch, so measure first, and a split-rail bar that expands gives a snug, no-wobble hold. Magnetic boards skip the slot entirely but need a ferrous cast-iron or steel table to grip. Always feed with a push stick regardless of which board you use.
Top picks at a glance
Magswitch Universal Featherboard
Clamps anywhere on a cast-iron table via two on/off magnetic switches instead of a miter slot, so it also handles vertical.
View on Amazon →Milescraft 1407 D/T FeatherBoard
The same proven miter-bar system as the 1406 but configurable as two boards for tandem pressure before and after the blade.
View on Amazon →What should you look for in featherboard for a table saw?
A few things separate a good featherboard for a table saw from a frustrating one: mount type, fit, safety, and surface. Weigh these before you buy.
- Mount type: miter-slot bars (Milescraft) versus a magnetic base (Magswitch).
- Fit: confirm a 5/8 or 3/4 inch miter slot before buying slot-mount boards.
- Safety: pressure toward the fence resists kickback, always feed with a push stick.
- Surface: the magnetic model requires a cast-iron or steel table.
How the picks compare on specs
| Spec | Milescraft 1406 (pick) | Magswitch Universal | Milescraft 1407 D/T |
|---|---|---|---|
| Mounting | Miter slot | Magnetic | Miter slot |
| Bar sizes | 5/8 and 3/4 in | N/A | 5/8 and 3/4 in |
| Config | Single | Single/vertical | Dual/tandem |
| Table needed | Any with slot | Ferrous only | Any with slot |
What are the best alternatives?
Magnetic, no slot needed
Magswitch Universal Featherboard
Clamps anywhere on a cast-iron table via two on/off magnetic switches instead of a miter slot, so it also handles vertical and right-of-blade positions the slot-mounted boards cannot. Great for thicker stock and quick repositioning, but it needs a ferrous cast-iron or steel table to grip and costs several times more than the Milescraft.
View on Amazon
Dual/tandem
Milescraft 1407 D/T FeatherBoard
The same proven miter-bar system as the 1406 but configurable as two boards for tandem pressure before and after the blade, giving more consistent contact on longer rips. Includes both bar sizes for standard slots. A step up when a single board is not holding stock steadily enough.
View on AmazonBottom line: the Milescraft 1406 is the safe low-cost pick that fits standard miter slots; the Magswitch is the magnetic option for saws where you want slot-free placement, and the Milescraft 1407 adds tandem pressure for longer rips. Measure your slot first.
Our top pickMilescraft 1406 FeatherBoard
View on Amazon
Frequently asked questions
What is the best featherboard for a table saw?
Milescraft 1406 FeatherBoard. This is the default recommendation because it ships with both 5/8 inch and 3/4 inch miter bars, so it locks securely into the standard miter slots on the large majority of table saws and router tables.
What should you look for in featherboard for a table saw?
Focus on mount type, fit, safety, and surface.
What is a good alternative to the Milescraft 1406 FeatherBoard?
The Magswitch Universal Featherboard. Clamps anywhere on a cast-iron table via two on/off magnetic switches instead of a miter slot, so it also handles vertical and right-of-blade positions the slot-mounted boards cannot. Great for thicker stock and quick repositioning, but it needs a ferrous cast-iron or steel table to grip and costs several times more than the Milescraft.
Related buying guides
- Air Purifier for Allergies
- Air Purifier for Pets
- Air Purifier for Mold
- Air Purifier for a Bedroom
- Air Purifier for Smoke
This is a research-based buying guide, not a personal hands-on review. Product details, prices, and availability can change; confirm the current listing on Amazon. As an Amazon Associate I earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
← More Guides: A–F · All guides · How we research · About · Affiliate Disclosure · Privacy Policy · Contact